• Facebook

Engine Building

Engine Building

Grid  List 

Set Ascending Direction
  • David Vizard's How to Build Horsepower

    David Vizard's How to Build Horsepower

    Proven methods for increasing horsepower in any engine. Explains the latest and most effective engine building techniques and strategies. Vizard's unique and entertaining style of writing clearly explains the key principles and provides extreme detail.

    $26.95
  • Dodge Challenger and Charger: How to Build and Modify 2006-Present

    Dodge Challenger and Charger: How to Build and Modify 2006-Present

    In the pursuit of a higher-performing LX-platform car, former Mopar Muscle editor Randy Bolig has created this book to show you how to extract ultimate performance from these cars.

    $29.95
  • Camaro 5th Gen 2010-2015: How to Build and Modify

    Camaro 5th Gen 2010-2015: How to Build and Modify

    Filling these pages is great step-by-step information on modifying your 5th Gen Camaro, including upgrade instruction on brakes, suspension, rear axles, intake and exhaust, cooling, fuel systems, transmissions, LS engine mods, superchargers, turbochargers, ECM tuning, aftermarket EFIs, and more.

    $29.95
  • Ford Flathead Engines: How to Rebuild & Modify

    Ford Flathead Engines: How to Rebuild & Modify

    Takes you step-by-step through rebuilding a vintage flathead.

    $26.95
  • Ford Small-Block Engine Parts Interchange

    Ford Small-Block Engine Parts Interchange

    Thoroughly researched and focused entirely on the small-block Windsor and Cleveland engine families, Ford Small Block Engine Parts Interchange includes critical information on Ford's greatest small-block engines and goes into great detail on the highly desirable high-performance hardware produced throughout the 1960s, 1970s, and 1980s.

    $26.95
  • Chevrolet GMC & Buick Speed Manual: 1954 Edition

    Chevrolet GMC & Buick Speed Manual: 1954 Edition

    This is a reprint of the original 1954 edition featuring the Chevrolet inline six-cylinder 216 and 235 cubic-inch engines, GMC 228, 248, 256, 270 and 302-CID engines and Buick straight-eight 248 and 320-CID engines.

    $19.95
  • Chevy Big-Block Engine Parts Interchange: The Ultimate Guide to Sourcing and Selecting Compatible Factory Parts

    Chevy Big-Block Engine Parts Interchange: The Ultimate Guide to Sourcing and Selecting Compatible Factory Parts

    This handy and informative reference manual lets you create entirely unique Chevy big-block engines with strokes, bores, and power outputs never seen in factory configurations.

    $26.95
  • BMW 3-Series (E36) 1992-1999: How to Build and Modify

    BMW 3-Series (E36) 1992-1999: How to Build and Modify

    The BMW 3 Series set the benchmark for performance and luxury. Yet even at this high standard, these cars can be dramatically improved. Each major component group of the car can be modified or upgraded for more performance, so you can build a better car that's balanced and refined.

    $26.95
  • How to Swap Ford Modular Engines into Mustangs, Torinos and More

    How to Swap Ford Modular Engines into Mustangs, Torinos and More

    Modular engine swaps specialist Dave Stribling guides you through each crucial step of the engine transplant process with insightful tips and detailed instructions, making this book a vital component to upgrading the performance of your classic Mustang. Book also includes engine swaps for hot rods, trucks, and other Ford muscle cars.

    $26.95
  • Mopar Small-Block Engines: How to Build Max Performance

    Mopar Small-Block Engines: How to Build Max Performance

    This book identifies the best parts and guides you through specific techniques to extract maximum performance from your Mopar small-block.

    $26.95
  • David Vizard's How to Port & Flow Test Cylinder Heads

    David Vizard's How to Port & Flow Test Cylinder Heads

    Author Vizard covers blending the bowls, basic porting procedures, as well as pocket porting, porting the intake runners, and many advanced procedures. Advanced procedures include unshrouding valves and developing the ideal port area and angle.

    $29.95
  • Performance Exhaust Systems: How to Design, Fabricate, and Install

    Performance Exhaust Systems: How to Design, Fabricate, and Install

    This comprehensive book is your guide to achieving ultimate exhaust system performance. It shows you how to fabricate a system for custom applications and to fit the correct prefabricated system to your car.

    $26.95
  • Modern Engine Blueprinting Techniques: A Practical Guide to Precision Engine Building

    Modern Engine Blueprinting Techniques: A Practical Guide to Precision Engine Building

    In this book, expert engine builder and veteran author Mike Mavrigian explains and illustrates the most discriminating engine building techniques and perform detailed procedures, so the engine is perfectly balanced, matched, and optimized.

    $29.95
  • Automotive Diagnostic Systems: Understanding OBD-I & OBD-II

    Automotive Diagnostic Systems: Understanding OBD-I & OBD-II

    Author McCord provides a thorough process for trouble shooting problems, tracing a problem to its root, explaining why DTCs may not lead to the source of the underlying problem, and ultimately resolving the problem. Contains full DTC code chart.

    $26.95
  • How to Build LS Gen IV Performance on the Dyno: Optimal Parts Combos for Maximum Horsepower

    How to Build LS Gen IV Performance on the Dyno: Optimal Parts Combos for Maximum Horsepower

    This book shows you a solid selection process for assembling a powerful engine package, shows popular packages, and then demonstrates the dyno results of these packages. As such, this is an indispensible resource for anyone building GM LS Gen IV engine.

    $26.95
  • Practical Engine Airflow: Performance Theory and Applications

    Practical Engine Airflow: Performance Theory and Applications

    Author John Baechtel explains airflow dynamics through an engine in layman's terms so you can easily absorb it and apply it. The principles of airflow are explained; specifically, the physics of air and how it flows through major engine components, including the intake, heads, cylinders, and exhaust system.

    $29.95
  • How to Design, Build & Equip Your Automotive Workshop on a Budget

    How to Design, Build & Equip Your Automotive Workshop on a Budget

    Provides the necessary information as the hobbyist considers various tools, designs, installations, and products available for their automotive workspace.

    $24.95
  • How to Build Small-Block Chevy Circle-Track Racing Engines

    How to Build Small-Block Chevy Circle-Track Racing Engines

    Chock full of tips and tricks that will have your engine making more power than the competition. Readers will also benefit from the advice of top engine builder Keith Dorton, and will follow the builds from 3 famous engine builders.

    $24.95
  • How to Build Horsepower - Volume 2

    How to Build Horsepower - Volume 2

    This book is all about induction, including Carter, Holley, Predator, Weber, Dellorto, and Mikuni carbs, and dozens of manifolds. Also covers carb calibration methods, analysis of different designs, mixture ration, and more.

    $24.95
  • Dyno Testing & Tuning

    Dyno Testing & Tuning

    The first book to explain the proper testing procedures that everyone should use to get accurate results from an engine or chassis dyno. This book should also be required reading for shop owners and dyno operators.

    $24.95
  • How to Rebuild Any Automotive Engine

    How to Rebuild Any Automotive Engine

    Covers the basics of any engine rebuild in more than 400 photos of step-by-step instruction. Covered are tool requirements, engine removal, engine disassembly, and more.

    $24.95
  • Souping the Stock Engine

    Souping the Stock Engine

    Reprinted from the 1950 classic, this true hotrodders' guidebook provides effective methods for tuning all types of stock engines from the conservative road car to full-race capability.

    $19.95
  • Chevrolet Inline Six-Cylinder Power Manual

    Chevrolet Inline Six-Cylinder Power Manual

    This updated version of the original Chevrolet Inline Six-Cylinder Power Manualis jam packed with the latest blueprints, interviews, airflow charts, build sheets, racer and "hot dog" profiles.

    $29.95
  • Automotive Machining: A Guide to Boring, Decking, Honing & More

    Automotive Machining: A Guide to Boring, Decking, Honing & More

    Author Mike Mavrigian shows you how to inspect, measure, and evaluate components so you can provide astute guidance and make the best machine work choices. Machining procedures include cylinder boring, align boring/honing, decking, valve seat cutting, cam tunnel boring, and a multitude of other services. In addition, multi-angle valve jobs, setting the valve seats, altering rocker arm ratio, re-conditioning connecting rods, machining and matching valvetrain components are also covered.

    $29.95
  • Competition Engine Building: Advanced Engine Design & Assembly Techniques

    Competition Engine Building: Advanced Engine Design & Assembly Techniques

    Authored by veteran author John Baechtel, Competition Engine Building stands alone as a premier guide for enthusiasts and students of the racing engine. It will also find favor as a reference guide for experienced professionals for years to come.

    $29.95

Grid  List 

Set Ascending Direction