Cart
Checkout Secure

Call us to order a book!

1-800-551-4754

Monday-Friday 8-4:30 CST

Building 4.6/5.4L Ford Horsepower on the Dyno

Your Price:
$45.95
Availability: In Stock
Product Code: SA115P
Quantity
 
Checkout Secure

Building 4.6/5.4L Ford Horsepower on the Dyno

Your Price:
$45.95
Currently out of stock
The photos in this edition are black and white.

The 4.6- and 5.4-liter modular Ford engines are finally catching up with the legendary 5.0L in terms of aftermarket support and performance parts availability. Having a lot of parts to choose from is great for the enthusiast, but it can also make it harder to figure out what parts and modifications will work best. Building 4.6/5.4L Ford Horsepower on the Dyno takes the guesswork out of modification and parts selection by showing you the types of horsepower and torque gains expected by each modification.

Author Richard Holdener uses over 340 photos and 185 back-to-back dyno graphs to show you which parts increase horsepower and torque, and which parts don't deliver on their promises. Unlike sources that only give you peak numbers and gains, Building 4.6/5.4L Ford Horsepower on the Dyno includes complete before-and-after dyno graphs, so you can see where in the RPM range these parts make (or lose) the most horsepower and torque. Holdener covers upgrades for 2-, 3-, and 4-valve modular engines, with chapters on throttle bodies and inlet elbows, intake manifolds, cylinder heads, camshafts, nitrous oxide, supercharging, turbocharging, headers, exhaust systems, and complete engine buildups.

Your links and content here....
The photos in this edition are black and white.

The 4.6- and 5.4-liter modular Ford engines are finally catching up with the legendary 5.0L in terms of aftermarket support and performance parts availability. Having a lot of parts to choose from is great for the enthusiast, but it can also make it harder to figure out what parts and modifications will work best. Building 4.6/5.4L Ford Horsepower on the Dyno takes the guesswork out of modification and parts selection by showing you the types of horsepower and torque gains expected by each modification.

Author Richard Holdener uses over 340 photos and 185 back-to-back dyno graphs to show you which parts increase horsepower and torque, and which parts don't deliver on their promises. Unlike sources that only give you peak numbers and gains, Building 4.6/5.4L Ford Horsepower on the Dyno includes complete before-and-after dyno graphs, so you can see where in the RPM range these parts make (or lose) the most horsepower and torque. Holdener covers upgrades for 2-, 3-, and 4-valve modular engines, with chapters on throttle bodies and inlet elbows, intake manifolds, cylinder heads, camshafts, nitrous oxide, supercharging, turbocharging, headers, exhaust systems, and complete engine buildups.

Pages : 208
Size : 8.5 X 11 (inches)
Format : Paperback / softback
Illustrations : 340 b/w
Publisher : CarTech
ISBN : 9781613250082
Product Code : SA115P

Introduction: On the Dyno 

 

Chapter 1 Throttle Bodies and Inlet Elbows 

Test 1: PI 2-Valve GT: Throttle Body & Intake Elbow Shoot-Out

Test 2: Vortech Supercharged PI 2-Valve GT: Throttle Body & Intake Elbow Shoot-Out

Test 3: Ford Racing Supercharged PI 2-Valve GT: Ford Racing 70-mm Throttle Body

Test 4: Kenne Bell Supercharged Early 2-Valve GT: Cold Air, MAF, & Throttle Body

Test 5: Kenne Bell Supercharged 2-Valve 5.4L Lightning: Throttle Body Upgrade

Test 6: 4-Valve Cobra: Accufab Throttle Body

Test 7: Eaton Supercharged 4-Valve ‘03 Cobra: Accufab Throttle Body & Inlet

Test 8: 5.0L Stroker 2-Valve: Accufab 75-mm Throttle Body & Inlet

 

Chapter 2 Intake Manifolds

Test 1: 2-Valve GT: PI Intake vs. Truck Intake

Test 2: 4.6L 2-Valve Truck Divided Intake Plenum Test

Test 3: 2-Valve GT: PI Intake vs. Ford Racing Bullitt Intake

Test 4: 2-Valve GT: PI Intake vs. Reichard Racing Short-Runner Intake

Test 5: 2-Valve GT: PI Intake vs. Fox Lake P51 Intake

Test 6: 4-Valve Cobra: SHM Ported ‘01 Cobra Intake vs. Ford Racing FR500 Intake

Test 7: Ford Racing FR500 Intake: Long vs. Short Runners

Test 8: Vortech Supercharged 4-Valve ‘03 Cobra: Effect of Runner Length

Test 9: 5.0L Stroker 2-Valve GT: Variable Runner Intake

 

Chapter 3 Cylinder Heads

Test 1: Early 2-Valve GT vs. PI 2-Valve GT

Test 2: Early 2-Valve GT Heads vs. TEA CNC-Ported PI 2-Valve GT Heads

Test 3: Early 2-Valve GT vs. FPS Early 2-Valve GT Heads, Cams, & PI Intake

Test 4: PI 2-Valve GT: Effect of Compression Ratio

Test 5: Kenne Bell Supercharged 2-Valve GT: Effect of Compression Ratio

Test 6: 4-Valve 5.4L: Effect of Compression Ratio

Test 7: ATI Supercharged 4-Valve 5.4L: Effect of Compression Ratio

Test 8: 2-Valve PI GT vs. 3-Valve ’05 GT

 

Chapter 4 Camshafts 

Test 1: Early 2-Valve GT: Comp Cams XE274H Camshafts

Test 2: PI 2-Valve GT: Six Sets of Comp Cams Xtreme Energy Camshafts

Test 3: Ford Racing Supercharged PI 2-Valve GT: Comp Cams XE262H Camshafts

Test 4: Vortech Supercharged Early 2-Valve GT: Comp Cams XE274H Camshafts

Test 5: Naturally Aspirated ‘03 4-Valve: Cobra Cams vs. Comp Cams XE262AH Camshafts

Test 6: 4-Valve Cobra: Degreeing Comp XE262AH Cams

Test 7: Eaton Supercharged ‘03 4-Valve Cobra: Comp Cams XE262AH Camshafts

Test 8: Kenne Bell Supercharged ‘03 4-Valve Cobra: Comp Cams XE262AH Camshafts

Test 9: Kenne Bell Supercharged ‘03 4-Valve Cobra: Crower Stage 2 Camshafts

Test 10: PI 2-Valve GT: Crane Cams HR-212/550-25-15 Camshafts

 

Chapter 5 Nitrous Oxide

Test 1: Early 2-Valve GT: With a 100-hp Zex Kit

Test 2: Early 2-Valve GT: With a 125-hp Zex Kit

Test 3: Naturally Aspirated 4-Valve ‘03 Cobra: With a 125-hp NOS NOSzle Setup

Test 4: Naturally Aspirated 4-Valve ‘03 Cobra: Effect of Reduced Timing in Anticipation of Nitrous

Test 5: Eaton Supercharged 4-Valve ‘03 Cobra: With a 125-hp Zex Kit

Test 6: Kenne Bell Boost-A-Spark Cured Misfire with Supercharger & Nitrous

Test 7: Paxton Supercharged 4-Valve Cobra: With a 75-hp Zex Kit

Test 8: ’05 3-Valve GT: With a 75-hp Zex Kit

 

Chapter 6: 2-Valve Supercharging 

Test 1: PI 2-Valve GT: Ford Racing Supercharger

Test 2: Ford Racing Supercharged 2-Valve GT: 3.6-inch Pulley vs. 3.4-inch Pulley

Test 3: Early 2-Valve GT: Kenne Bell Supercharger

Test 4: PI 2-Valve GT: Kenne Bell Supercharger

Test 5: PI 2-Valve GT: Vortech T-Trim Supercharger

Test 6: Vortech T-Trim Supercharged 2-Valve GT: 12 psi vs. 16.9 psi

Test 7: Kenne Bell Supercharged PI 2-Valve GT: 1.7L vs. 2.2L

Test 8: 2-Valve 5.4L Lightning: Kenne Bell Supercharger Upgrade

Test 9: PI 2-Valve GT: Vortech T-Trim vs. JT-Trim

 

Chapter 7: Supercharging 3- and 4-Valve Modular Engines 

Test 1: 4-Valve ’03 Cobra: Naturally Apirated vs. Eaton Supercharger

Test 2: Eaton Supercharged 4-Valve ‘03 Cobra: Pulley Upgrades

Test 3: 4-Valve ’03 Cobra: Eaton Supercharger vs. Kenne Bell Upgrade

Test 4: 4-Valve ’03 Cobra: Eaton Supercharger vs. Vortech T-Trim Upgrade

Test 5: 3-Valve ’05 GT: Paxton Novi 1200 Supercharger

Test 6: Kenne Bell Supercharged 4-Valve ’03 Cobra: 16.5 psi vs. 19.5 psi

Test 7: 4-Valve 5.4L: ATI F2M Supercharger

Test 8: 4-Valve Cobra: Paxton Novi 2000 Supercharger

Test 9: Paxton Supercharged 4-Valve Cobra: Effect of Intercooling

Test 10: 3-Valve ’05 GT: Kenne Bell Supercharger

 

Chapter 8: Turbocharging 

Test 1: Early 2-Valve GT: HP Performance Twin-Turbo Kit

Test 2: HP Twin-Turbo Early 2-Valve GT: 10 psi vs. 14 psi

Test 3: Early 4-Valve Cobra: HP Twin-Turbo Kit

Test 4: 4-Valve ’03 Cobra: Turbo vs. Blower, Blower, & Blower (11 psi)

Test 5: 4-Valve ’03 Cobra: Turbo vs. Blower, Blower, & Blower (14 psi)

Test 6: 4-Valve ’03 Cobra: NA vs. HP Twin-Turbo Kit (20.8 psi)

Test 7: Mihovitz 4.6L Twin-Turbo Race Motor: 25 psi vs. 29 psi

Test 8: 3-Valve ’05 GT: HP Twin-Turbo Kit

 

Chapter 9: Exhaust Systems

Test 1: Early 2-Valve GT: Hooker Long-Tube Headers

Test 2: PI 2-Valve GT: Ford Racing Shorty Headers

Test 3: PI 2-Valve GT: Kooks 158-inch Long-Tube Headers

Test 4: Eaton Supercharged 4-Valve ’03 Cobra: Flow-Tech Long-Tube Headers

Test 5: Kenne Bell Supercharged 4-Valve ’03 Cobra: Bassani Cat-Back Exhaust

Test 6: 3-Valve ’05 GT: JBA Long-Tube Headers

Test 7: Kenne Bell Supercharged 4-Valve ’03 Cobra: Kooks 158- vs. 134-inch Headers

Test 8: 4-Valve Cobra: Ford Racing Shorty Headers

Test 9: 4-Valve Cobra: Hooker Long-Tube Headers

 

Chapter 10: Engine Buildups 

Test 1: 407-hp PI 2-Valve GT

Test 2: 490-hp 5.0L Stroker PI 2-Valve GT

Test 3: 800-hp Vortech Supercharged PI 2-Valve GT

Test 4: 990-hp Twin-Turbo 4-Valve ’03 Cobra

Test 5: 1,350-hp ATI F2M Supercharged 5.4L 4-Valve

Building 4.6/5.4L Ford Horsepower on the Dyno

$45.95

Added to cart!
Note our Christmas Delivery Deadlines! You must choose UPS Ground to help ensure your order arrives before Christmas. Our warehouse is closed Good Friday, March 29. Any orders placed after 10 am (CST) March 28 will not ship until Monday, April 1. You Have Achieved Free Shipping