Cart
Checkout Secure

Call us to order a book!

1-800-551-4754

Monday-Friday 8:00 - 4:30 pm CST

Vintage Speed Parts: The Equipment That Fueled the Industry

Your Price:
$31.96 $39.95

Availability: In Stock
Product Code: CT682
Quantity
 
Checkout Secure

Vintage Speed Parts: The Equipment That Fueled the Industry

Your Price:
$31.96 $39.95

Currently out of stock


Follow the history of hot rodding through this nostalgic look at vintage speed equipment.


When most people think of speed parts, they rewind a few decades and think back to the Ford flatheads that were so prevalent in the 1940s and 1950s. However, did you know that the speed parts industry began way back in the Model T era? It's true. As soon as vehicles were mass produced, manufacturers were looking for ways to make them faster. Manufacturers, such as Roof, Rajo, Winfield, Miller, Frontenac, and Holley, made speed parts for 4-cylinder Model T engines and accomplished speeds of up to 100 mph!


In Vintage Speed Parts: The Equipment That Fueled the Industry, veteran hot rod historian Tony Thacker looks at the history of hot rodding through the eyes of speed equipment manufacturers. Covered chronologically, the book begins with the early 4-cylinder engines. In 1932, Henry Ford introduced the flathead V-8, which was slow to be adopted as the engine of choice in racing until the parts industry caught up. Once it did, the flathead, although interrupted by the war, was the engine to run until the automobile manufacturers introduced overhead-valve V-8 engines in the late 1940s. Chrysler's early-1950s Hemi and Chevrolet's small-block V-8 in 1955 spelled the end for the flattie. Both mills dominated well into the 1970s, and the speed industry was there to support all platforms in spades. During that period, every auto manufacturer made a V-8 worthy of modification, and the speed industry boomed. Eventually, the speed equipment manufacturers grew to the point of becoming corporate entities, as mergers and acquisitions became the much less interesting story.


Parts covered include special cylinder heads, magnetos, camshaft and valvetrain upgrades, downdraft carburetors, headers, multiple-carburetor setups, and even superchargers. Everyone figured out how to make engines more powerful, upgrading with the type of parts that were being produced decades later, even to today. Join in the fun of reviewing the history of speed through this fascinating tale of vintage speed parts.

Your links and content here....


Follow the history of hot rodding through this nostalgic look at vintage speed equipment.


When most people think of speed parts, they rewind a few decades and think back to the Ford flatheads that were so prevalent in the 1940s and 1950s. However, did you know that the speed parts industry began way back in the Model T era? It's true. As soon as vehicles were mass produced, manufacturers were looking for ways to make them faster. Manufacturers, such as Roof, Rajo, Winfield, Miller, Frontenac, and Holley, made speed parts for 4-cylinder Model T engines and accomplished speeds of up to 100 mph!


In Vintage Speed Parts: The Equipment That Fueled the Industry, veteran hot rod historian Tony Thacker looks at the history of hot rodding through the eyes of speed equipment manufacturers. Covered chronologically, the book begins with the early 4-cylinder engines. In 1932, Henry Ford introduced the flathead V-8, which was slow to be adopted as the engine of choice in racing until the parts industry caught up. Once it did, the flathead, although interrupted by the war, was the engine to run until the automobile manufacturers introduced overhead-valve V-8 engines in the late 1940s. Chrysler's early-1950s Hemi and Chevrolet's small-block V-8 in 1955 spelled the end for the flattie. Both mills dominated well into the 1970s, and the speed industry was there to support all platforms in spades. During that period, every auto manufacturer made a V-8 worthy of modification, and the speed industry boomed. Eventually, the speed equipment manufacturers grew to the point of becoming corporate entities, as mergers and acquisitions became the much less interesting story.


Parts covered include special cylinder heads, magnetos, camshaft and valvetrain upgrades, downdraft carburetors, headers, multiple-carburetor setups, and even superchargers. Everyone figured out how to make engines more powerful, upgrading with the type of parts that were being produced decades later, even to today. Join in the fun of reviewing the history of speed through this fascinating tale of vintage speed parts.

Pages : 192
Size : 8.5 X 11 (inches)
Format : Paperback / softback
Illustrations : 257 color & 198 b/w photos
Publisher : CarTech
ISBN : 9781613256978
Product Code : CT682

Acknowledgments 

Introduction 

Chapter 1: 1908–1932: Model Ts, Model As, and Chevrolets 

Chapter 2: 1932–1942: The Ford V-8

Chapter 3: 1945–1948: Boom, Boom, Boom

Chapter 4: 1948–1951: At Last, the 1948 Show

Chapter 5: 1951–1955: The Chrysler Hemi Spells the Death of the Flathead Ford

Chapter 6: 1955–1962: Glory Days

Chapter 7: 1963–1966: Muscle Bound

Chapter 8: 1967–1973: Change Is in the Air

Epilogue

eBook link not available for this Book

Vintage Speed Parts: The Equipment That Fueled the Industry

$31.96 $39.95

Here's What The Experts Are Saying...

Added to cart!
Note our Christmas Delivery Deadlines! You must choose UPS Ground to help ensure your order arrives before Christmas. Our office will be closed December 31. We'll be back on Monday, January 3! You Have Achieved Free Shipping